Showing 226–234 of 347 results

• 

  Parker TG Torqlink Motors

  Parker TG Motor PDF

  Max. Pressure: 140–190 Bar
  Maximum Oil Flow: 114 LPM
  Maximum Speed: 660 RPM
  Max. Torque Cont.: 1044 Nm
  
  

• 

  PoleStar Smart High Pressure Compressed Air Refrigeration Dryers

  Polestar HP Dryer PDF

  Effective removal of water vapour (to +3°C pdp) from compressed air at low operating costs. Dual frequency ready, with volume flows up to 10800m³/h (50Hz) or 11812m³/hr (60Hz) @ 7 BarG.

   

• 

  Racor 490R Diesel Fuel Filter

  Parker-Racor 400 Series

  Application: Mobile & Industrial Diesel Engines up to 400Hp
  Maximum flow rate: 341 lph/90 gph
  Port size: 3/4″-16 SAE

• 

  Racor 900 Series Diesel Fuel Filter

  Parker Racor 900 1000MA/MAM PDF

  Marine Diesel Engines Up To: 400HP
  Maximum Flow Rate: 341 LPH/90 GPH
  Maximum Pressure: 15 PSI
  Port Size: 7/8”-14 UNF

• 

  Service Junior Kit

  Parker Service JR Kit PDF

  1x Plastic Case (Holds Two Service Juniors)
  1x Service Junior
  1x ¼” BSPP Female / M16 x 2 Male Adaptor
  1x M16 x 2 Male / M16 x 2 Male Adaptor
  1x Test Hose 1500 mm

• 

  Transair® Flexible Hose

  Transair Piping Catalogue PDF

  Transair® Flexible Compressed Air Hose installs quickly to Transair components and without prior preparation or cutting. Due to the tight bend radius, minimum space is required for installation.

• 

  Ultra High Purity Nitrogen Generator

  UHP N2 Generators PDF

  Parker domnick hunter nitrogen gas generators produce ultra-high purity nitrogen for GC and other critical analytical applications. Flow rates range from 0.75 L/min to 3 L/min, with purities >99.9995%.

   

• 

  Walvoil H Series Handle button with Rocker

  Walvoil H Handle PDF

  Ergonomic Design
  Ergonomic Handle Made Of Thermoplastic Material
  Available With Different Proportional & On/Off Functions
  Available With Or Without “Dead Man” Trigger

• 

  B&C Group 2 German 2 Bolt

  B&C GROUP 2 GERMAN PDF

  Sizes: 11.1cc/rev to 26.1cc/rev
  Shaft: T50 = 1:5 Tapered 140 Nm
  D90 = 9T spline Din 110Nm
  Spigot: 50mm
  Mount: BN 2 thru bolt holes 11 & 5 O’Clock
  BZ 2 thru bolt holes 1 & 7 O’Clock
  Ports: BG20-11 – 26 suction 40 PCD x 35 PCD