Hydraulics
Showing 1–9 of 20 results
-
M3 Hydraulic Vane Motor
Maximum Speed: 3000 RPM
Mount: SAE A – 2 Bolt
Shaft: 3/4” Parallel Keyed
Ports: Pressure: 3/4” BSPP | Drain: 3/8” BSPP -
Parker Denison Single Vane | T7BS
Displacements From: 5.8cc – 50.0cc/rev
SAE B Parallel & Spline Shaft Options
Cont. Operating Pressures Up To: 290 Bar
Mount: 2 Bolt SAE B (4” Spigot)
Shaft: 7/8” Parallel Keyed
13T x 7/8” Spline
15T x 1” Spline
Bi Directional -
Parker Volvo F1 Axial Piston Pump
Continuous Pressure-350bar
Spherical Pistons-High Speeds
Laminated Pistons-Low Leakage
6 Stocked Capacities from 25.6cc/rev to 102.9cc/rev
Clockwise Rotation
Rear Ports
Shaft: B8x32x36 DIN 5462 (ISO14) -
M4D Hydraulic Vane Motor
Maximum Speed: 2500 RPM
Mount: SAE C – 2 & 4 Bolt
Shaft: 1 1/4”-14T Splined (SAE C)
Ports: Pressure: 1 1/4” Code 61 | Drain: 3/4”-16 UNF -
Parker Denison Single Vane | T6C
Cont. Operating Pressures Up To: 240 Bar
Displacements from 10.8 cc to 100 cc/rev
Operating pressure up to 275 bar max
Mount: 2 Bolt SAE B (4” Spigot)
Shaft: 7/8” Parallel Keyed
13T x 7/8” Spline
15T x 1” Spline
Bi Directional Cartridges -
Denison Gold Cup Motor
Maximum Displacement: 501.5 cc/rev
Maximum Flow Rate: 328 GPM/901 LPM
Operating Pressure: 350 Bar/5000 PSI
Side/Rear/Opposing Ports, Mount & Shaft: SAE
Flange, Straight Threaded Port Types -
M4E Hydraulic Vane Motor
Maximum Speed: 2500 RPM
Mount: SAE C – 2 & 4 Bolt
Shaft: 1 1/4” Parallel (SAE C)
Ports: Pressure: 2” Code 61 | Drain: 3/4”-16 UNF -
Parker Denison Single Vane | T7DS & T6DM
Displacements From: 47–158cc/rev
SAE C Parallel & Spline Shaft Options
Operating Pressures Up To: 250 Bar (T7D)
Mount: 2 Bolt SAE C (5” Spigot)
Shaft: 1-1/4” Parallel Keyed
14T x 1-1/4” Spline
32mm Parallel Key
Double Lip Vane Technology
Note: T6D Series Now Use T7 Range Of Industrial Cartridges, T6 Are For Mobile Range -
Parker Denison Single Vane | T7ES & T6EM
Displacements from 132 cc to 269 cc/rev
Operating pressure up to 240 Bar (210 Bar Continuous)
Mount: 2 Bolt SAE C (5” Spigot)
Shaft: 1-1/2” Parallel Keyed
1-1/4” Parallel Keyed
14T x 1-1/4” Spline
17T x 1-1/2” Spline